Polar data setup

Polar data setup contains the settings for balloon and directivity measurements.

Numerous Presets are available covering frequent measuring tasks. All presets are editable and thus can be adjusted to more specific needs.

El. start [°] / Azi. start [°] defines the angle at which the first horizontal / vertical measurement is to be performed; El. stop [°] / Azi. stop [°] is the equivalent for the last measurement. The angular range in between is passed through in steps specified by El. step [°] / Azi. step [°].

The Output files section defines what happens with the measured data.

With WinMF or SPK output activated each single measurement is stored as a single file in the respective format into the current directory.

Copy to directivity editor directly transfers the measurement to the Edit directivity section.

Plot directivity creates a graphic from the measuring results.

The inputs from the fields Manufacturer, Loudspeaker type and Configuration under Measurement info are transferred directly to the corresponding section in Edit directivity.